Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
15
4.
Install wall plate
using four lag bolts and four washers (use only the lag bolts and washers from the Concrete Installation Kit*).
Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
*
Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.
3
14
and insert four anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit*).
*
4
15
*
11
Publicidad
