Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injuries and property damage!
●
17
Mount the wall plate
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between the top two fasteners: 4 ¾ in. (120.6 mm)
1.
Position the wall plate template
2.
Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
16
10
directly onto the concrete surface
16
on the wall at your desired height. Level the wall plate template and mark the hole locations.
4 ¾ in.
Min.
(120.6 mm)
Solid Concrete or Concrete Block Option
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
2
16
3 in.
(75 mm)
3/8 in.
(10 mm)
Publicidad
