Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
using three lag bolts and three washers (use only the lag bolts and washers from the Concrete Installation Kit*).
17
4.
Install wall plate
Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
*
Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.
3
16
and insert three anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit*).
*
4
17
*
11
Publicidad
