Dmx Mode - Luxibel LX101 Manual Del Usuario

6. Press <ENTER> and use <UP> or <DOWN> to set the strobe effect
7. Finally, press <ENTER> to confirm. Note that you will have selected the first colour. Simply press
<MENU> to exit.
Dimmer speed setting
1. Press <MENU> until
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired dimmer speed (
4. Press <ENTER> to confirm your selection.
7.4

DMX Mode

This mode allows you to control the fixture by any universal DMX controller.
•
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen" to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
•
When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
In case of the 3-channel LX101, you will have to set the start address of the first unit to 1
o
(CH1~3), the second unit to 4 (1 + 3) (CH4~6), the third to 7 (4 + 3) (CH7~9), and so on.
In case of the 4-channel LX101, you will have to set the start address of the first unit to 1
o
(CH1~4), the second unit to 5 (1 + 4) (CH5~8), the third to 9 (5 + 4) (CH9~12), and so on.
In case of the 9-channel LX101, you will have to set the start address of the first unit to 1
o
(CH1~9), the second unit to 10 (1 + 9) (CH10~18), the third to 19 (10 + 9) (CH19~27), and
so on.
1. Press <MENU> until
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to set the number of DMX channels (
4. Press <MENU> until
5. Press <ENTER> to confirm your selection.
6. Use <UP> or <DOWN> to select the desired DMX starting address (
DMX Channel Values
9-Channel Mode
channel function
1 master dimmer
2 red
3 green
4 blue
5 colour macros
V. 01 – 06/06/2012
LX101
is displayed.
is displayed.
is displayed.
from to description
000 255 0 ~ 100%
0 ~ 100%
000 255
(or step time for auto program)
0 ~ 100%
000 255
(or fade time for auto program)
000 255 0 ~ 100%
000 010 no function
red
011 255 100%
031 050
051 070 0%
071 090 0%
091 110
111 130 100%
131 150 100%
151 170
171 200 100%
7
(off) ~
, ~
, or
~
green blue
0%
100% 0%
100%
100%
0% 100%
0%
100%
100% 100%
©Velleman nv
(max.).
).
)
).