Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Dimmer speed setting
1.
Press <MENU> until
2.
Press <ENTER> to confirm your selection.
3.
Use <UP> or <DOWN> to select the desired dimmer speed (
4.
Press <ENTER> to confirm your selection.
7.4
DMX Mode
This mode allows you to control the fixture by any universal DMX controller.
•
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen" to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
•
When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
In case of the 2-channel LX102, you will have to set the start address of the first unit to 1
o
(CH1~2), the second unit to 3 (1 + 2) (CH3~4), the third to 5 (3 + 2) (CH5~6), and so on.
In case of the 3-channel LX102, you will have to set the start address of the first unit to 1
o
(CH1~3), the second unit to 4 (1 + 3) (CH4~6), the third to 7 (4 + 3) (CH7~9), and so on.
In case of the 7-channel LX102, you will have to set the start address of the first unit to 1
o
(CH1~7), the second unit to 8 (1 + 7) (CH8~14), the third to 15 (8 + 7) (CH15~21), and so
on.
1.
Press <MENU> until
2.
Press <ENTER> to confirm your selection.
3.
Use <UP> or <DOWN> to set the number of DMX channels (
4.
Press <MENU> until
5.
Press <ENTER> to confirm your selection.
6.
Use <UP> or <DOWN> to select the desired DMX starting address (
DMX Channel Values
2-Channel Mode
channel
function
1
warm white
2
cold white
3-Channel Mode
channel
function
1
master dimmer
2
warm white
3
cold white
7-Channel Mode
channel
function
1
master dimmer
2
warm white
3
cold white
4
strobe
5
auto programs
V. 01 – 06/06/2012
LX102
is displayed.
is displayed.
is displayed.
from
000
000
from
000
000
000
from
to
000
255
000
255
000
255
000
009
010
255
000
051
052
101
102
152
153
203
204
254
255
-
7
,
,
to
description
255
0 ~ 100%
255
0 ~ 100%
to
description
255
0 ~ 100%
255
0 ~ 100%
255
0 ~ 100%
description
0 ~ 100%
0 ~ 100%
0 ~ 100%
strobe off
strobe 0 ~ 20Hz (slow ~ fast)
no function
auto program 1
auto program 2
auto program 3
auto program 4
auto program 5
~
).
or
)
~
).
©Velleman nv
Publicidad
Tabla de contenido
