Af Button; Specifications - Rotel RT-02 Manual De Instrucciones

RT-02 AM/FM Stereo Tuner

AF Button

G
Remote Only
In some cases, an RDS station is part of a
network of stations broadcasting the same
programming (for example, BBC1 program-
ming in the UK may be available at several
different frequencies). Stations broadcasting
this programming may transmit an RDS data
signal providing the tuner with a list of alter-
nate frequencies where this programming is
available. If this data list is transmitted, an AF
indicator will appear in the DISPLAY.
The AF button is used to scan the alternate fre-
quencies to find a stronger signal. The button is
only functional when the AF indicator is lit.
1. Press the AF button. The tuner will scan
each of the alternate frequencies for the
same programming in the stored list and
tune to the strongest signal.
2. If no station is located, the tuner will return
to the last previously tuned station.
3. If the signal strength of the new station is
weaker, the tuner will revert to the previously
tuned station.
4. Cancel the AF function by pressing any
button (except DIMMER or FM MONO).
Specifications
FM Tuner
Usable Sensitivity:
50dB Quieting Sensitivity:
Signal to Noise Ratio (at 65 dBf):
Harmonic Distortion (at 65 dBf):
Frequency Response:
Capture Ratio:
Alternate Channel Selectivity:
Spurious Response Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
AM Suppression Ratio:
Stereo Separation (100Hz/1 kHz/10 kHz):
Output level:
Antenna Input:
AM Tuner
Usable Sensitivity:
Selectivity:
Harmonic Distortion:
Image Rejection Ratio:
Signal to Noise Ratio:
Output level:
Antenna Input:
General
Power Consumption:
Power Requirements (AC):
Weight:
Dimensions (W x H x D):
Panel Height
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
10
14.2 dBf
20.2 dBf (mono)
45.3 dBf (stereo)
73 dBf (mono)
70 dBf (stereo)
0.2% (mono)
0.3% (stereo)
10 Hz-15 kHz, ±3 dB
2.0 dB
47 dB (±400 kHz)
90 dB
80 dB
80 dB
55 dB
40 dB/45 dB/35 dB
1V
75 ohms unbalanced
500 µV/m
25 dB
0.5%
45 dB
40 dB
500 mV
Loop Antenna
10 watts
115 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
3.9 Kg/8.6 lb.
435 x 72 x 319 mm
171/8" x 27/8" x 109/16"
60 mm / 23/8"