Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Printing method
Dot density
Printing direction
Printing width
Number of characters
*1
Printing speed
Paper feed speed
Line spacing (default)
Roll paper
Width
(single-ply)
Diameter
Spool
Specified thermal roll
paper type
Recommended liner-
free label type
Interface
(compatible)
Receive buffer
Cash drawer function
*2
Supply voltage
Temperature
Humidity
Overall dimensions
Weight (mass)
*1:
Set DIP Switches 2-3 and 2-4 for each paper type. (See Table B on iv.)
*2:
Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less
58mm paper width model
Thermal line printing
203 dpi × 203 dpi [dots per 25.4 mm {1"}]
Unidirectional with friction feed
52.5 mm {2.07"}, 420 dot positions
Alphanumeric characters: 95; International characters: 48
Extended graphics: 128 × 11 pages (including user-defined page)
Recommended liner-free label: 150 mm/s {5.9"/s} (default)
Thermal roll paper: 177 mm/s {7.0"/s} max.
Ladder bar code and 2D code: 88 mm/s {3.46"/s}
The above speed values are approximate.
Approx. 150 mm/s {approx. 5.9"/s} continuous paper feed
3.75 mm {1/6.7"}
57.5 mm ± 0.5 mm {2.26" ± 0.02"}
Maximum outside diameter:83 mm {3.27"}
Roll Paper spool diameter:Inside: 12 mm {0.47"}; Outside: 18 mm {0.71"}
NTP058-80
MS214150
Serial (RS232/RS485)/Parallel (IEEE1284)/Ethernet (10/100Base-T)/
USB (Full speed)
4KB/45 bytes
2 drives
DC + 24 V ± 7%
Operating:
5 to 45°C {41 to 113°F}
Storage:
–10 to 50°C {14 to 122°F}, except for paper
Operating:
Recommended liner-free label:10 to 80% RH
Thermal roll paper: 10 to 90% RH
Storage:
10 to 90% RH, except for paper
148 × 145 × 195 mm {5.83 × 5.71 × 7.68"} (H × W × D)
Approx. 1.8 kg {3.96 lb}
80mm paper width model
72 mm {2.83"}, 576 dot positions
79.5 mm ± 0.5 mm {3.13" ± 0.02"}
NTP080-80
MS318150
dpi: dots per 25.4 mm (dots per inch)
English
v
Publicidad
