Restriction of Use
When this product is used for applications requiring high reliability/safety such
as transportation devices related to aviation, rail, marine, automotive etc.; disaster
prevention devices; various safety devices etc; or functional/precision devices etc,
you should use this product only after giving consideration to including fail-safes
and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely
high reliability/safety such as aerospace equipment, main communication
equipment, nuclear power control equipment, or medical equipment related to
direct medical care etc, please make your own judgment on this product's
suitability after a full evaluation.
Unpacking
The following items are included with the standard specification printer. If any
item is damaged, contact your dealer.
❏
Printer
❏
Power switch cover
❏
AC adapter
Precautions When Installing the Power Supply Box
A description of EMI standards is on the bottom of the printer. When the optional
power supply box (OT-BX88) is installed, it is hard to check it. In such case,
uninstall the power supply box if necessary.
Important Installation Notes
❏
For a serial interface, use a null modem cable.
❏
For a parallel interface, use an IEEE 1284 cable.
❏
For a USB interface, install the driver before connecting the printer.
Downloading Drivers, Utilities, and Manuals
Drivers, utilities, and manuals can be downloaded from one of the following
URLs.
For customers in North America, go to the following web site:
http://www.epsonexpert.com/ and follow the on-screen instructions.
For customers in other countries, go to the following web site:
http://www.epson-pos.com/
Installing the Printer Horizontally or Vertically
You can install the printer horizontally on a flat surface (with the paper exit on
top) or vertically (with the paper exit at the front) by hanging it on a wall, using
the optional WH-10 hanging bracket set.
WARNING:
When hanging the printer on the wall with the hanging bracket set, be sure to
attach a connector cover to the printer.
❑
Roll Paper
❑
Connector cover
TM-T88IV ReStick User's Manual 3
English