Sony Cyber-shot DSC-W350 Manual De Instrucciones página 9

Cámara fotografía digital
Ocultar thumbs Ver también para Cyber-shot DSC-W350:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Notes on recording/playback
• When you use a memory card with this camera for the first time, it is
recommended to format the card using the camera for stable performance of
the memory card before shooting. Note that formatting permanently erases
all data on the memory card, and is unrecoverable. Save precious data on a
computer, etc.
• Before you start recording, make a trial recording to make sure that the
camera is working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof. Read
"Precautions" (page 25) before operating the camera.
• Avoid exposing the camera to water. If water enters inside the camera, a
malfunction may occur. In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the
malfunction of the camera.
• Do not use the camera near a location that generates strong radio waves or
emits radiation. Otherwise, the camera may not properly record or play back
images.
• Using the camera in sandy or dusty locations may cause malfunctions.
• If moisture condensation occurs, remove it before using the camera .
• Do not shake or strike the camera. It may cause a malfunction and you may
not be able to record images. Furthermore, the recording media may become
unusable or image data may be damaged.
• Clean the flash surface before use. The heat of flash emission may cause dirt
on the flash surface to become discolored or to stick to the flash surface,
resulting in insufficient light emission.
Carl Zeiss lens
• The camera is equipped with a Carl Zeiss lens which is capable of
reproducing sharp images with excellent contrast. The lens for the camera
has been produced under a quality assurance system certified by Carl Zeiss
in accordance with the quality standards of Carl Zeiss in Germany.
Notes on the LCD screen and lens
• The LCD screen is manufactured using extremely high-precision technology
so over 99.99% of the pixels are operational for effective use. However,
some tiny black and/or bright dots (white, red, blue or green) may appear on
the LCD screen. These dots are a normal result of the manufacturing process,
and do not affect the recording.
• When the battery level becomes low, the lens might stop moving. Insert a
charged battery pack and turn on the camera again.
GB
GB
9

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Cyber-shot dsc-w360

Tabla de contenido