Unold 86430 Instrucciones De Uso página 27

12. Attention: If the appliance was previously on heating operation, the
outflowing air will still be warm initially. Depending on the previous heating
capacity it can take some time until the appliance provides cool air.
Oscillation function / swing function
13. With this function it is possible to distribute the air flow over a larger area,
because the appliance swings back and forth in a specific radius.
14. The oscillation function can be switched on in every mode. To do this, select
the button. If you want to stop the appliance in a specific position,
press the
15. Switch off the oscillation function before you switch off the appliance.
Timer
16. Via the Timer button
This is possible in the range 1 to 8 hours in increments of 60 minutes. Press
the „Timer" button until the selected time is illuminated. After this time
elapses the appliance switches off automatically. If you do not make a time
setting, the appliance will run continuously.
Selecting the temperature
17. Use the "+" and "-" buttons on the remote control to select the desired
temperature in a range between 10 and 35°C.
18. The selected temperature is shown in the display.
19. The appliance shows the current room temperature, the set temperature will
be maintained automatically.
Switching off
20. To switch off the appliance, press the ON/OFF button, switch the main
switch on the rear of the appliance to "0" and unplug the plug from the
electrical outlet.
21. Important note: The appliance has an automatic switch-off with cooling mode.
If the appliance was running in heating mode, it takes about 30 seconds for the
appliance to turn off after pressing the ON / OFF button.
Be aware that the appliance can become very hot – danger of burns!
Particularly ensure that children are kept away from the appliance.
Stand 24.2.2020
Copyright UNOLD AG | www.unold.de
button again.
you can select the desired runtime of the appliance.
DE
EN
FR
NL
IT
ES
PL
27 von 76