Zooming in on a picture
1
Press M/m to move the cursor (yellow) to "Picture
Size" and press ENTER.
P i c t u r e
S i z e
2
Keep pressing </, to change the size of the
picture.
3
Press ENTER to set the size you have selected.
Notes
• Picture And Picture Function can show one RGB
picture from either INPUT1 or INPUT2 and one
video picture from the VIDEO connectors.
• The function is not available for component signal.
• The function is not available for signals input to the
Component/RGB Input Adaptor BKM-V11.
L
R
Viewing two pictures at the same time / Adjusting the Sound Quality
Adjusting the Sound
Quality
When a speaker SS-SP20B (not supplied) installed,
you can adjust sound treble level, bass level, or
balance of the speaker (left and right) volume. The
surround mode can also be set.
Adjusting the Treble, Bass, and
Balance, etc.
Press MENU to show the main menu and adjust
"Treble," "Bass," "Balance," or "Surround" from the
Adjust Sound menu.
Treble
Select "Treble" with M/m and press ENTER.
Adjust the treble with M/m/</, within the range of
MIN (–50) to MAX (+50).
M/,: Increases sound treble.
m/<: Decreases sound treble.
Bass
Select "Bass" with M/m and press ENTER.
Adjust the bass with M/m/</, within the range of
MIN (–50) to MAX (+50).
M/,: Increases sound bass.
m/<: Decreases sound bass.
Balance
Select "Balance" with M/m and press ENTER.
Adjust the balance with M/m/</, within the range
of LEFT (50) to RIGHT (50).
M/,: Increases the volume on the right side.
m/<: Increases the volume on the left side.
39
(GB)