Sony GXD-L52H1 Manual De Instrucciones página 55

Location and Function of Parts and Controls
Front
(INPUT) button
1
Press to select a signal to be input from the INPUT or
OPTION connector.
The signal to be input switches as follows each time
you press the INPUT button.
S Video Video
OPTION
When an optional adaptor supporting the video signal
is not installed in the OPTION slot, OPTION will be
skipped.
2 MENU button (page 20)
34 –/+/f/F (volume/cursor) button
Press to control speaker volume. When the menu is
displayed, press to move the cursor or set a value.
(ENTER) button
5
Press to set your choice.
(RETURN) button
6
This returns to the preceding menu screen.
7 1 (POWER) switch
Switches the display on or off (standby).
HD15 DVI
HDMI
8 Sony logo
The Sony logo lights up.
You can switch the logo that lights on the menu
according to the direction of setup. See "Logo" on
page 31.
(Power/Stand by) indicator
9
• Lights up in green when the display is switched on.
• Lights up in red when the display is in standby
mode. Lights up in orange when the display enters
the power saving mode while a signal is input from
a PC.
When the indicator blinks in red, see
page 38.
Note
When the "LED" option in the "Multi Display"
settings is set to "Off" and the "Position" option is not
set to the right-bottom, the indicator does not light up
in green even when the display is turned on, except for
the case of no signal or an unsupported signal.
Remote control sensor
0
GB
7
GB