Initial Installation - Harbor Breeze CALERA Manual Del Usuario

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method to use.

Note: Flushmount installation is not available for
this item.
Important:
If using the angle mount, check to ensure
the ceiling angle is not steeper than 25°.
3. Ensure the blades (I) will be at least 30 in. from
any obstructions. Also check the downrod (A)
length to ensure the blades (I) will be at least 7 ft.
above the floor.
1
2
Downrod Mounting
Flushmount
3
A
7
Angle Mounting
Closemount
30 in.
Minimum
I
7 ft.
Minimum
Lowes.com/harborbreeze