Initial Installation - Harbor Breeze 40075 Manual De Instrucciones

INITIAL INSTALLATION

1. Turn off the circuit breakers and wall switch to the fan
supply line leads.
DANGERt Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting methods to use.
Notet
Flushmount installation is not available for this
item.

Importantt If using the angle mount, check to ensure
the ceiling angle is not steeper than 19°.
3. Ensure that the blades (G) will be at least 30 in. from
any obstructions. Also check the downrod (A) length
to ensure the blades (G) will be at least 7 ft. above
the floor.
1
2
3
A
G
7
Lowes.com/harborbreeze
30" Min
7' Min