Initial Installation - Harbor Breeze TILGHMAN Manual Del Usuario

INITIAL INSTALLATION

Turn off circuit breakers and wall switch to the fan
1.
supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
2. Determine mounting method to use.
A. Downrod mount (standard or angled ceiling)
B. Closemount (standard ceiling only)
IMPORTANT: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
Check to make sure blades (G) will be at least 30
3.
inches from any obstruction and at least 7 ft. above
the floor.
All manuals and user guides at all-guides.com
6
1
2
A
B
3
G
7 ft.
min.
Lowes.com/harborbreeze
30 in.
min.