Initial Installation - Harbor Breeze 40101 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method to use.

Note:
Flushmount installation is not available for this
item.

Important:
If using the angle mount, check to ensure
the ceiling angle is not steeper than 23°.
3. Ensure the blades (F) will be at least 30 in. from
any obstructions. Also check the downrod (A)
length to ensure the blades (F) will be at least 7 ft.
above the floor.
1
2
Downrod Mounting
Flushmount
3
A
F
Lowes.com/harborbreeze
7
Angle Mounting
Closemount
30 in. Min.
7 ft. Min.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

0451809

Tabla de contenido