Closemount Instructions - Harbor Breeze 40087 Manual De Instrucciones

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
10. With the wire buttons facing the mounting bracket (C),
lift the downrod (A) into the mounting bracket (C).
Note:
Plugs from downrod (A) should seat securely
in integrated wiring system on mounting
bracket (C).
Proceed to Final Installation on page 15.

CLOSEMOUNT INSTRUCTIONS

1. Remove the canopy cover (G) from the bottom of the
canopy (B).
Helpful Hint: Closemount-style mounting is more
suitable for ceilings lower than 8 ft. high. The
downrod (A) and canopy cover (G) are not used in
this type of installation.
2. Align the canopy (B) with the holes in the top of the
motor assembly (E). Secure the canopy (B) to the
top of the motor assembly (E) with the closemount
screws (GG).
Hardware Used
GG
Closemount Screw
10
1
2
B
x 3
Lowes.com/harborbreeze
12
C
A
GG
B
G
E