Closemount-Style Fan Mounting - Harbor Breeze WAVEPORT Manual Del Usuario

DOWNROD-STYLE FAN MOUNTING
5. If you cut back the lead wires in Step 4, strip 1/2 in.
of insulation from end of of each wire -- white,
black, green and blue (if applicable). Twist stripped
ends of each strand of wire within the insulation
with pliers (not included).
Install hanging ball of downrod (A) into opening of
6.
mounting bracket (C). Align the slot in hanging ball
with the tab in mounting bracket (C).
DANGER: Failure to align slot in hanging ball
with the tab in mounting bracket (C) may result in
serious injury or death.
Continue to WIRING on page 11.

CLOSEMOUNT-STYLE FAN MOUNTING

1.
Remove preassembled canopy cover from bottom
of canopy (B). [NOTE: It may be necessary to use
the handle end of a screwdriver (not included) to
remove the canopy cover by tapping on the
canopy cover from the inside of the canopy (B).]
NOTE: The downrod (A), yoke cover (E) and
canopy cover are not used in this type of
installation.
All manuals and user guides at all-guides.com
9
5
6
A
1
Lowes.com/harborbreeze
C
Tab
Slot
B
B
Canopy
Cover