Binding Cables; Removing The Handles; Affixing The Protection Covers - Sharp PN-V601 Manual De Instrucciones

Binding Cables

: Cable clamp attachment

Removing the Handles

Handle screws
Handle

Affixing the Protection Covers

Protection
cover
Protection cover
The cables connected to the terminals on the rear of the
monitor can be fastened with the cable clamps.
Insert the cable clamp into the cable clamp attachment on the
rear of the monitor and fasten the cables.
Cable
Cable clamp
attachment
Cable clamp
The handles can be removed.
The removed handles can be attached on the side.
Caution
• The removed handles and handle screws are for use with
this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle
screws which were removed from the monitor.
• Be sure the handles are attached securely.
After installing the monitor, affix the protection covers (4
pieces) as necessary.
11
E