Attaching The Battery - Advanced Bionics Sky CI M90 CI-5295 Instrucciones De Uso

Operating Instructions
Powering Sky CI M90
The sound processor is turned on when a charged battery
is attached to the sound processor. When the battery
is fi rst attached, the orange LED located in the middle of
the multifunction button will indicate battery charge.
The startup program is selected by the cochlear implant
professional during programming.
To power down the Sky CI M90 sound processor,
simply remove the battery.

Attaching the Battery

Hold the Sky CI M90 in one hand. Rotate the headpiece
cable upward in order to avoid bumping it upon battery
placement.
Align the battery connector with the sound processor
housing side of the connector.
12