Advanced Bionics Sky CI M90 CI-5295 Instrucciones De Uso página 29

When making a phone call, you will hear a dialing tone
through the sound processor. The sound processor
microphones pick up your voice. When receiving a call,
a call notification will be heard through the sound processor.
You can accept the call with a short press on the upper
or lower part of the multifunction button on the sound
processor or directly on the phone.
You can reject or end a call with a long press on the upper
or lower part of the multifunction button on the sound
processor or directly through the phone.
Streaming Audio via Bluetooth with the Sky CI M90
After successful pairing of your processor(s) to your
Bluetooth-enabled device, ensure that your device is not
muted and volume is not set to minimum.Then, simply start
the audio on the Bluetooth-enabled device and the sound
processor will start streaming the audio. Environmental
balance and access to surrounding sounds can be
managed using the multifunction button, the AB Remote
mobile application, or the Phonak RemoteControl.
Pairing the Sky CI M90 to Phonak Accessories
Your Sky CI M90 can be paired to the following Phonak
accessories:
• Phonak RemoteControl
•
Phonak TV Connector
•
Phonak PartnerMic
•
Phonak Roger transmitters
•
Phonak Sky Link M hearing instrument
27