Kenwood KDC-X700 Manual De Instrucciones página 21

Reproductor de discos compactos receptor de fm/am
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BLUETOOTH®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current call
Reject another incoming call
While having two active calls...
End current call and activate
held call
Swap between the current
call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
On the faceplate
Press
.
Press
.
Press
.
Press
.
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
Press
during a call.
• Operations may vary
according to the connected
Bluetooth device.
.
On the remote control
MIC GAIN
Press
.
NR LEVEL
Press
.
ECHO CANCEL
Press
.
Press
.
Make the settings for receiving a call
1
Press
2
Turn the volume knob to select an item (see the
following table), then press the knob.
( Not available )
3
Repeat step
or activated.
4
Press and hold
To return to the previous setting item, press
( Not available )
SETTINGS
AUTO ANSWER
BATT/SIGNAL*
* Functionality depends on the type of the phone used.
Default: XX
–10 — +10 (–4): The sensitivity of the
microphone increases as the number increased.
–5 — +5 (0): Adjust the noise reduction level
until the least noise is being heard during a
phone conversation.
–5 — +5 (0): Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
to enter Bluetooth mode.
2
until the desired item is selected
to exit.
Default: XX
1 — 30: The unit answers incoming call
automatically in the selected time (in
seconds). ; OFF: Cancels.
AUTO: Shows the strength of the battery
and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected. ;
OFF: Cancels. Clock time is shown.
ENGLISH
.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-bt765hd

Tabla de contenido