ELECTRICAL CIRCUIT DIAGRAM
IMPORTANT PRECAUTIONS
Do not lift unit by door handle.
Never install or operate the unit behind closed doors.
Allow unit temperature to stabilize for 24 hour before use.
Do not block any internal Fans.
Use only genuine supplier's replacement parts. Imitation parts can damage the unit, affect its
operation or performance and may void the warranty.
INSTALLATION INSTRUCTIONS
Before using your wine cooler:
Remove the exterior and interior packing
Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a floor that is strong enough to support the appliance when it is fully
loaded.
To level your appliance, adjust the front legs at the bottom of the appliance.
OPERATING YOUR WINE COOLER
How to use the press-buttons on the Display Panel:
You can set the temperature as your desire by pressing the button. There are three press-button on the
20
VSC4514D.indd 20
8/26/2016 2:10:37 PM