CELME FAMILY 220 CE Manual De Instalación página 8

1.1 GENERAL PRECAUTIONS
THE SLICER MUST BE MANAGED BY SKILLED PERSONNEL, FAMILIAR WITH THE
INSTRUCTIONS FOR USE AND SAFETY CONTAINED IN THIS MANUAL. IT IS A HOUSEHOLD
SLICER AND MUST NOT BE FOR PROFESSIONAL USE
EVEN IF THE MACHINE COMES WITH SEVERAL SAFETY SYSTEMS, AVOID SETTING THE
HANDS NEAR THE BLADE AND MOVING PARTS.
BEFORE THE CLEANING AND MAINTENANCE OPERATIONS, CHECK TO MAKE SURE THE
MACHINE IS DISCONNECTED FROM THE MAINS.
PERIODICALY CHECK CABLE AND ELECTRIC ELEMENTS CONDITIONS.
NEVER USE THE SLICER FOR CUTTING FREEZED FOOD, MEAT AND FISH WITH BONES, OR
FOR NON-FOOD PRODUCTS.
WHENEVER THE BLADE DIAMETER IS REDUCED OF MORE THAN 10 MMS., APPLY TO THE
ASSISTANCE SERVICE FOR REPLACEMENT.
NEVER CARRY OUT REPEARING OPERATIONS PERSONNALLY, BUT APPLY ALWAYS TO
SKILLED PERSONNEL.
1.2 MECHANICAL SAFETIES
THE SLICERS WE PRODUCE AND WHICH ARE DESCRIBED IN THIS MANUAL MEET, AS FAR AS
SAFETIES ARE CONCERNED, THE PRESCRIPTIONS ON THE RISKS OF MECHANICAL TYPE
ISSUED BY E.E.C. AS : EEC 2004/108 AND FOR THE SANITARY REGULATIONS THEY COMPLY
WITH THE RULE 1935/2004. AND ROHS 2002/95/EEC AND RAEE 2002/96/EEC REGULATIONS
REACH 1907/2006.
1.3 ELECTRICAL SAFETIES
THE SAFETIES AGAINST ELECTRICAL RISKS COMPLY WITH THE REGULATIONS CENELEC EN
335/1 / EN 335-2-14 AND 2004/108/EEC
DUE TO THE PERFECT INSULATION OF ALL THE ELECTRIC ELEMENTS AND THE REMARKABLE
RESISTANCE OF ALL THE MATERIALS USED, OUR MACHINES CAN BE INSTALLED TO WORK
INSIDE MOIST PREMISES. IN FACT, THEY HAVE BEEN CREATED TO WITHSTAND CLEANING
THROUGH A FINE WATER SPRINKLE AS PRESCRIBED BY THE REGULATIONS CEI 70-1 FOR THE
DEGREE OF PROTECTION IP23.
WARNING:
IN CONFORMITY WITH POINT 1.7.2. "INSTRUCTIONS ON FURTHER RISKS"
CONTAINED IN THE E.E.C. REGULATIONS 80/392 AND 91/368, THESE PROTECTIONS AND
SAFETIES STRICTLY COMPLY WITH THESE REGULATIONS.
WE POINT OUT HOWEVER THAT THE ABOVE MENTIONED PROTECTIONS, EVEN
SENSIBLY REDUCE BOTH THE POSSIBILITY AND EXTENT OF THE DAMAGE, DO NOT ELIMINATE
FULLY THE RISK OF CUTTING.
TECHNICAL FEATURES OF THE SERIES OF SLICERS "FAMILY -FA":
POSSIBILITY OF INTERMITTENT WORK
THEIR USE, CLEANING AND MAINTENANCE IS QUITE SAFE
THANKS TO THEIR DESIGN AND TO THE REALIZATION OF ALL PARTS IN STAINLESS STEEL
AND ANODIZED ALUMINIUM ALLOY WITHOUT EDGES FOR EASY CLEANING OPERATIONS,
THESE SLICERS FULLY COMPLY WITH THE MOST STRICT SANITARY REGULATIONS.
2.1 TABLE OF WEIGHTS AND MEASURES
MODEL DIMENSIONS
FAMILY 220 37 x 46 x 32
FAMILY 250 41 x 52 x 34
FAMILY 275 44 x 55 x 37
FA 220 37 x 46 x 38
FA 250 41 x 52 x 38
1) INFORMATION ON SAFETIES
2) TECHNICAL FEATURES
WEIGHT
CM. KG
10,5
14
14,8
11,5
14,5
POWER ELECTRICAL
WATT CONNECTION
132 230/1/50
147 230/1/50
147 230/1/50
132 230/1/50
147 230/1/50
IF THEY
BLADE
REVS.
290
290
290
290
290
8