Maintenance And Cleaning; Troubleshooting - ECG VP 3144 S Manual De Instrucciones

MAINTENANCE AND CLEANING

Attention:
Always unplug the power cord from the outlet before any maintenance and cleaning.
1. Changing the dust bag: When the colour of the dust bag indicator changes to red, it is time to change or
empty the dust bag.
• Press the lock in front to open the front cover.
• Remove the full dust bag from the holder.
• Insert new dust bag in the holder under the front cover.
2. Clean the motor fi lter twice a year: Open the front cover, remove the fi lter, wash it with warm water and dry
thoroughly before using it again. If the fi lter is damaged replace it with a new one.
3. Clean the output fi lter regularly: Open and remove the cover grill of the output fi lter. Shake to remove the
accumulated dust. If the fi lter is damaged replace it with a new one.
4. Cleaning of the appliance surface: To clean use a soft cloth slightly moistened with a few drops of mild
detergent. Never use a solvent or any abrasive scouring cleaners. Never immerse vacuum cleaner in water
or any other liquid and do not clean it under running water.
Attention:
You can fi nd replacement fi lter bags for VP 3163 S vacuum cleaner under the name KOMA ECG VP 3163 S. You
can also use universal bags Swirl® Y12® MicroPor® Plus a BASE BA 4090.
® Swirl, MicroPor® Plus a Y 12 are registered trademarks of Melitta Group.

TROUBLESHOOTING

Before referring to a service centre, check the following list of common problems and how to remove
them.
Problem
The motor will not
start.
The suction power is
reduced.
Possible cause
The vacuum cleaner is not
powered.
Full dust bag, clogged hose or
tube or dirty fi lters.
Solution
Check the power cord and plug.
Refer to an authorized service centre if the
problems persist.
Replace the dust bag, remove foreign objects from
the hose or tube, replace fi lters.
GB
31