Setting The Equalizer (Eq3) - Sony CDX-SW200 Manual De Instrucciones

Ocultar thumbs Ver también para CDX-SW200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, N-
AGE, ROCK, CUST, and OFF (equalizer OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(Radio or CD).
2
Press (EQ3) repeatedly until the
desired equalizer curve.
Each time you press (EQ3), the item
changes.
To cancel the equalizing effect, select "OFF."
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
Press (SOURCE) to select a source
(Radio or CD).
2
Press (EQ3) repeatedly to select the
desired equalizer curve.
3
Adjusting the equalizer curve.
1 Press (SEL) repeatedly to select the
desired tone range.
Each time you press (SEL), the tone range
changes.
LOW t MID t HI (t BAL t FAD)
2 Press the volume +/– button
repeatedly to adjust to the desired
volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
3 Repeat step 1 and 2 to adjust the
equalizer curve.
To restore the factory-set equalizer curve,
press (SEL) for 2 seconds.
After 3 seconds, the display returns to
normal play mode.
Note
When EQ3 is set to "OFF," you cannot adjust the
equalizer curve settings.
13

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido