Other Functions; Adjusting The Balance And Fader; Quickly Attenuating The Sound; Changing The Sound And Display - Sony CDX-SW200 Manual De Instrucciones

Ocultar thumbs Ver también para CDX-SW200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Other Functions

Adjusting the balance and
fader
You can adjust the balance and fader.
1
Press (SEL) repeatedly until "BAL" or
"FAD" appears.
Each time you press (SEL), the item changes
as follows:
LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)
* When EQ3 is activated (page 13).
2
Press the volume +/– button to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT).
"ATT" appears in the display.
To restore the previous volume level, press
(ATT) again.
12
Changing the sound and
display settings
The following items can be set:
• DEMO* — to turn the demonstration display
on or off.
– Select "ON" to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select "OFF" to deactivate the demonstration
display.
• BEEP — to turn the beeps on or off.
Selecting the desired item
Press (SEL) and the desired preset
number button simultaneously.
(SEL) + (4): DEMO*
(SEL) + (6): BEEP
* When the unit is turned off.
To cancel the item, press (SEL) and the preset
number button simultaneously again.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido