Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Pioneer KURO KRL-37V Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 244

Connecting a PC

Connecting a PC
HDMI Connection
PC
HDMI-certified cable
PC
DVI/HDMI cable
ø 3.5 mm stereo minijack cable
Analogue Connection
PC
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
PC
ø 3.5 mm stereo minijack cable
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 42 for a list of PC signals compatible with
the TV.
A Macintosh adaptor may be required for use for some
Macintosh computers.
When connecting to a PC, the input signal type is
automatically detected except 1,024 g 768 and 1,360 g
768 signals. Refer to Selection input resolution on page
40.
INPUT4 or 5
INPUT6
RGB cable
INPUT7
INPUT7
Displaying a PC image on the
screen

Selecting the picture size

You can select the picture size.
1
Press SCREEN SIZE.
The SCREEN SIZE menu displays.
2
Press SCREEN SIZE or a/b to select a
desired item on the menu.
NOTE
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
EXAMPLE
4:3
Item
FULL: An image fully fills the screen.
CINEMA: For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
4:3: Keeps the original aspect ratio in a full screen display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
NOTE
Refer to page 35 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The ANALOGUE RGB (PC) terminal
(INPUT7) is not compatible with 480i/576i/1080p signals.
FULL
39

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kuro krl-32v

Tabla de contenido