Husqvarna H342SL Manual Del Dueño página 8

6
UPPER CHUTE (See Figs. 6 and 7)
1. Lower mower to its lowest cutting position.
2. Assemble upper chute by inserting curved end into
hole in back of cover.
TIP: Holding upper chute as shown and twisting while
installing in cover will help keep the rubber seal in place.
NOTE: Handle carefully so as not to damage full bag
indicator.
COVER
3. Push in and turn upper chute until it is in line with lower
chute.
4. Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5. Secure with rubber latch by hooking hole in latch over
latch pin.
FULL BAG
COVER INDICATOR
UPPER
CHUTE
Fig. 6
UPPER
CHUTE
HANDLE
LATCH PIN
RUBBER
LATCH
ALIGN-
MENT
SLOT
BOSSES
Fig. 7
7
LEVEL MOWER
• Be sure mower is properly leveled for best mower
performance. See your tractors owner's manual for
instructions
LOWER
CHUTE
8