Selecting The Video Memory - Sony VPH-D50HTU Manual De Instrucciones

Selecting the Video Memory

Picture aspect data of the video memory preset at the factory
Video memory architecture
The picture aspect, picture adjustment and other data are stored in the
built-in memory function of the projector. You can select the preset data
by pressing the VIDEO MEMORY keys, 1 to 10. To reset to the data of
the input signal, press OFF key.
The following picture aspect data are preset at the factory.
NO. Picture aspect
OFF (IDTV ON) 4:3 (1.33:1)/Standard TV
OFF (IDTV OFF) 4:3 (1.33: 1)/Standard TV
1 1.66:1/European Vista (IDTV ON)
2 16:9 (1.78:1)/wide (IDTV ON)
3 1.85:1/American Vista (IDTV ON)
4 2:1 (IDTV ON)
5 2.35:1 (Cinema scope (IDTV ON)
6 1.66:1/European Vista (IDTV OFF)
7 16:9 (1.78:1)/wide (IDTV OFF)
8 1.85:1/American Vista (IDTV OFF)
9 2:1 (IDTV OFF)
10 2.35:1 (Cinema scope (IDTV OFF)
The data is memorised:
• When the MEMORY key is pressed
• When the input signal is changed
• When the input channel is changed
• When the adjustment mode is changed
Memory Adjustment data
Video memory
Color temperature, D. picture,
V shift, Set up, Component
format, V aperture, Picture
control (CONTRAST, BRIGHT,
COLOR, HUE, SHARP), RGB
size, RGB shift, Blanking
Number of memories
Memory numbers 1 to 10
23
(GB)