Using The Feed Chute And Pushers; Using The Speed Controls - Black+Decker FP6010-AR Manual De Instrucciones

4 . Attach your selected blade or disk to the center post
in the bottom of the large workbowl (instructions for
individual disks/blades follow in this manual) .
5 . Place the workbowl lid on top of the workbowl,
aligning the tabs and locking it into place by turning
counterclockwise . The workbowl lid is locked when
it clicks firmly into place . The lid will always and
only lock when the feed chute is aligned with the
workbowl handle . (B)
Note: Be sure to lock the workbowl in place before
attaching the blades or disks and lid .
6 . Insert the large food pusher into the feed chute of
the lid . Push down until the pusher clicks into place
and rests at the bottom of the feed chute . (C)
7 . Plug in the appliance . If the appliance is properly
assembled, the PULSE|OFF button will illuminate . If
it does not, the interlocks are not properly engaged .
Important: For your protection this appliance has an interlock system . The
processor will not operate unless the lid and large pusher are properly locked in
place . The unit will illuminate the PULSE|OFF light when the base, lid and large
pusher are in the proper position .
U SIN G TH E F E ED C HUTE AN D PU S HE RS
Note: Before operating the food processor, be sure
the workbowl, blades and workbowl lid are properly
assembled on the food processor base .
1 . Insert the large food pusher into the wide mouth
feed chute . Insert the medium pusher inside the
large pusher and the small food pusher inside the
medium pusher . The food pushers are used to guide
ingredients through the feed chute . The small and
medium food pushers can be removed to add liquid
or additional foods . (D)
Note: The large pusher must remain in the feed chute in order for the processor
to operate . The unit will continue to operate if the medium or small pushers are
removed from the large pusher .
2 . Place food to be processed in the opening of the large pusher . Use the
medium pusher to guide food through the large pusher and feed chute .
3 . Use the small food pusher to guide food through the medium pusher .
4 . Use the small food pusher as a measuring cup .
U SIN G TH E S P EE D CO N TR O L S
Note: If the food processor does not run, make sure the workbowl and lid are
properly locked on the base and the large food pusher is fully in place . There is an
automatic safety lock that causes the food processor to stop working if the large
29
B
C
D