Helpful Tips When Using The Dicing Disk; Using The Slicing Disk - Black+Decker FP6010-AR Manual De Instrucciones

HE LP FU L TI P S W HE N US IN G
THE DI CIN G D ISK
• Operate the dicing disk on LOW speed .
• It is recommended to stop dicing when workbowl is 60% full .
• Blade must be removed from the top of the disk before using the cleanout
tool .
• Cut the ends of food to be diced off for most uniform dice .
• For small and soft foods, such as strawberries, use the smallest feed chute
for best results .
• When dicing multiple ingredients, dice softer foods first and end with
hardest food .
• When dicing soft cheese, chill or freeze cheese prior to dicing .
• Not recommended for dicing corned beef, raw meat, or chicken .
• When dicing tomatoes, it is recommended to seed and peel them first .
• Firm, seedless cucumbers work best .
U SIN G TH E S LIC I N G D I SK
Important: The slicing disk can only be used with the large workbowl . Only
run the processor on MEDIUM or LOW speed when using the slicing disk . DO
NOT use slicing disk with small workbowl .
1 . Lock the large workbowl into position on base .
2 . Carefully place the slicing disk onto center post in workbowl . You may
need to rotate disk slightly until it fits onto post .
3 . Place lid on workbowl and lock into place by rotating counterclockwise . Place
the food pushers into the feed chute . Put ingredients in the feed chute and
guide food down towards blade with the food pusher .
Note: Position slicing disk just to the right of the feed chute . This allows the
blade a full rotation before contacting the food .
4 . To adjust the slicing thickness, move the lever at
the base of feed chute forward and backwards to
desired thickness setting (1-5mm) . Turn the lever
counterclockwise towards the front of the food
processor for thicker slices and clockwise towards
the back of the food processor for thinner slices . You
are able to adjust thickness while the processor is
running . (L)
5 . Press MEDIUM or LOW speed to slice; press lightly but firmly on food
pusher to guide food through processor .
Note: Heavy pressure on the pusher does not speed the work; use the pusher
only as a guide . Let the processor do the work . Pushing too hard may result in
inconsistent slicing thickness .
Note: It is possible to change the thickness of your slices by changing
(GR E E N)
32
L