Working Theory; Before Using Your New Induction Hob; Technical Specification; Operation Of Product - EAS ELECTRIC EMIH290-FX Manual Del Usuario

Ocultar thumbs Ver también para EMIH290-FX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.3 Working Theory

Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by
electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the
glass surface. The glass becomes hot only because the pan eventually warms it up.

2.4 Before using your New Induction Hob

Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.

3. Operation of Product

3.1 Touch Controls

The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
EMIH290-FX
3 Zones
220-240V~ 50Hz or 60Hz
7200W
590X520X60
560X490
9
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido