Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
If the total number of heating unit of the appliance you choose is not less than 4, the appliance can
be connected directly to the mains by single-phase electric connection, as shown below.
•
If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent
with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
•
The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorised technicians only.
•
The bottom surface and the power cord of the hob are not accessible after installation.
27
V.1
Publicidad
Capítulos
Tabla de contenido
