Assembly - Greencut GLM690X Manual De Instrucciones

74
TECHNICAL DATA
Engine
Cylinder capacity
Power
Starter system
Fuel capacity
Type of fuel
Oil Capacity
Oil type
Traction
Handlebar height adjustment
Blades
Cutting height
Cutting height
Grass catcher capacity
Chassis
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify technical data without prior notice.

ASSEMBLY

ATTENTION: The lawn mower is supplied without fuel and oil in the engine. Your new lawn mower
has been tested at the production site which means that the engine can contain a small amount
of residual oil.
ASSEMBLY OF THE HANDLEBAR
1. Carefully unfold the handlebar of the mower, taking care not to pinch or damage the control cables of the
machine.
2. Fit the lower links (3) into the bases (4). Make sure the mounting holes on the bottom rails are aligned with
those on the bases. Secure the lower links (3) with the screws and washers.
3. Unfold the upper handlebar bar (5) and tighten the knobs (1) clockwise to hold it in place.
GLM690X
Gasoline 4-stroke OHV
139cc
5cv / 3000rpm
EASY-START Manual
1,2L
Unleaded 95
0.45L
10W30 / 10W40 / 15W30 / 15W40
Rear / Self-propelled
Central adjuster
1 unit
25-75mm / 7 cutting heights
407mm (16")
45L
Steel
96 dB(A)
23Kg