Cleaning Schedule - Taurus HOMELAND GYRO Manual Del Usuario

the battery is left.
- To activate the Go Home mode, press the (AJ)
button on the remote control.
WATER TANK ICONTROL MODE
- At the end of the suction process, you can
change the dust deposit through the water
tank (AE) to continue cleaning. The water tank
works by dripping so the mop will moisten and
mop the floor.
- Open the hermetic lid of the tank (AG) and
introduce water into the tank.
- Put the mop that is fastened securely.
- Enter the water tank and select the cleaning
mode you need.
IMPORTANT:
- Do not use the mop outdoors.
- Remove the carpets to avoid damaging them.
- Before loading the robot, remove the water tank
and the mop.

CLEANING SCHEDULE

- The robot vacuum cleaner has cleaning sche-
dule settings that allow you to customize when
you clean your home.
- These settings can only be confirmed via the
remote control.
IMPORTANT:
- Make sure that the remote control is close to
the robot while setting the clock or time.
- Make sure that the power switch is in the ON
position.
1) CONFIGURE THE CLOCK OF THE REMOTE
CONTROL
- Press the (AN) button on the remote control,
the time selector starts blinking.
- Press the button to select the current day,
press the (AL) button to confirm, and enter the
setting.
- The hour (Hr) starts to flash, press the / button
to set the time, press the / button to switch
between hours and minutes, with each press,