Safety Precautions - EVBOX Elvi Manual Del Usuario

EN

Safety precautions

Warning: Risk of electric shock.
• Read the supplied documentation carefully to familiarize yourself with all safety
instructions and regulations before using this product.
• This product is designed and tested in accordance with international standards.
• The use of this product is limited to those applications it is designed for.
• Installation, maintenance and repairs of this product are only to be performed by
qualified personnel.
• Incorrect installation or repairs may cause hazardous situations for the user of this
product.
• This product is used in combination with a power source.
• Always switch off power before any maintenance activity.
• This product contains no user-serviceable parts. Consult EVBox or your
distributor for more information. Do not attempt to service or repair the charging
station yourself!
• Make sure that the product is only used under the correct operating conditions.
• Make sure that the main power is disconnected before storing or transporting
this product.
• The adaptors or conversion adaptors are not allowed to be used.
• Cord extension sets are not allowed to be used.
• Make sure that the power line to the wall dock is installed on a dedicated
circuit breaker (MCB) on your service panel. The installation must incorporate
an adequate residual-current device (RCD). The MCB must be in line with the
capacity of the EVBox Elvi charging cable used (3.7, 7.4, 11, 22 kW). In case the
amperage rating of the charging cable is different than the amperage rating
of the (MCB), the installer/user must change the station settings in the mobile
app for station management and/or backend portal account as provided by the
operator or service provider for this product.
The installing party must always ensure that the charging station is installed according
to the local regulations. The installation settings of the service panel must always be
adjusted by a qualified electrician.
EVBox is not responsible for any damage that occurs if this product is transported in a
different packaging than the packaging in which the product was originally supplied.
Store this product in a dry environment; the storage temperature must
be between -25 °C and +60 °C.
EVBox strives to manufacture products of the highest quality. EVBox products are fully
CE certified and compliant with the essential requirements of EMC Directive 2014/30/
EU and Low Voltage Directive 2014/35/EU. More details can be found at evbox.com or
in this installation manual. EVBox products are sold with a limited warranty described
at evbox.com/general-terms-conditions.
4