Beurer FWM 50 Instrucciones De Uso página 10

• This foot warmer must not be used by young children (3 – 8 years old)
unless the controller has been set by a parent or responsible adult
and the child has been given adequate instructions on how to use the
foot warmer safely.
• This foot warmer may be used by children over the age of 8 and by
people with reduced physical, sensory or mental skills or a lack of ex-
perience or knowledge, provided that they are supervised and have
been instructed on how to use the foot warmer safely, and are fully
aware of the consequent risks of use.
• Children must not play with the foot warmer.
• Cleaning and user maintenance must not be performed by children
unless supervised.
• This foot warmer is not designed for use in hospitals.
• This foot warmer must not be used to keep animals warm.
• Do not use this foot warmer with shoes.
• Do not insert needles.
• Only use in dry rooms.
• Use only the original mains part provided
(see "Technical data" chapter).
• The electrical and magnetic fields emitted by this foot warmer may
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this foot warmer.
• Do not pull, twist or make sharp bends in the cables.
• Please check this foot warmer frequently for signs of wear and tear or
damage.
If any such signs are evident, if the foot warmer has been used incor-
rectly or if it no longer heats up, it must be checked by the manufac-
turer before being switched on again.
• If the cable of the foot warmer is damaged, it must be replaced by
the manufacturer, its customer service department or a similarly qua-
lified person to avoid any risk.
• Always observe the notes on operation (section 5), cleaning and
maintenance (section 6) and storage (section 7).
• If you should have any questions about using our devices, please
contact Customer Services.
10