Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
c)
Assembling the Blender
The machine must be unplugged before any assembly and dismantling operations.
1.
Turn your blender jar over (3)
2.
Place the rubber seal (5) on the blender base (4)
3.
Place the blades (6) on the rubber seal.
4.
To fix the blades on the base they must be screwed
anticlockwise (see illustration opposite). To help you it is
possible to use the "Key for opening the base" (9) which
will enable you to have a better purchase on the blade
base.
5.
Place the assembled jar on the motor unit (7). To fix it turn it in a
clockwise direction.
6.
Fit the measuring cap (1) in the lid (2)
7.
Cover the glass jar with the lid (2) so that the seal is hermetic.
d) Installation of the Blender
1.
Place the assembled blender on a smooth, stable surface.
2.
Before connecting the blender to a power supply, check that the jar is correctly in position
on the motor unit and that it is at Position 0 (Off position)
3) USING YOUR MACHINE
a)
Instructions for Use
Plug the blender into an electric socket. You can adjust the speed at which the blades rotate,
i.e. choose the fast setting.
Adjusting the speed: Select the speed by turning the selection button to "1" or "2" depending
on the consistency of the food you wish to blend. Turn the control button to "0" to turn the
machine off.
Cleaning/Pulse: To mix using short pulses turn the control button to the left (pulse function) as
often as you wish to obtain the desired mixture. This function can also be used to clean the jar.
To do this, pour water and a drop of washing-up liquid into the blender.
Ice Crush Mode: Press the Ice Crush button and you can crush pieces of ice. As for the Pulse
mode it is necessary to hold down the button for the mode to operate.
It is possible to add ingredients when the machine is in operation. To do this unscrew
the measuring cap (A) by turning it anti-clockwise, as shown in the picture below:
17
Open
Close
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
