Using Your Machine; Assembling The Blender Foot And Blades; B) Using The Blender Foot - Brandt MX5SLIMV Manual De Instrucciones

 Carefully wash the blender foot and the blades in soapy water. Wipe the motor unit with a
slightly damp cloth. Then dry all the parts carefully.

3) USING YOUR MACHINE

a)

Assembling the Blender Foot and Blades

1) Blender foot
2) Blades
 Choose the blade. Exert a slight pressure on the centre of the
blade in the direction of the blender foot to attach it as
shown in Diagram 1
 A slight "click" will be heard telling you that the blade is
correctly fitted to the blender foot.
 To remove the blade make sure that the blender foot always
faces downwards to avoid any risk of injury when the blade is
removed.
 Take the dismantling key (12) and place it in the space at the
bottom of the blender foot (Diagram 2) holding it in the same
direction as on Diagram 3. The dismantling key is correctly
positioned when it touches the rod in the centre of the
blender foot.
 Then exercise a slight downward pressure to remove the blade.

b) Using the Blender Foot

 Once a blade is fitted on the blender foot you can plug the machine in.
 The blender foot must be placed at mid-height in the centre of the container.

Screw the motor unit onto the blender foot as shown in the
diagram opposite. Make sure that the motor unit is screwed up
to the stop. The arrow on the blender foot should face the
padlock located on the machine body.
19