Disposal And Recycling; Technical Data - stayer PBL122CPK Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
gb
WARRANTY
Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You
should fill out the card completely and retum to vendar
with a copy of purchasing receipt or invoice and you
should receive a receipt.
Note: lf you cannot find the warranty card within the
documentation,you must ask for it through your supplier.
The warranty is limited only to manufacturing
defects and expire if pieces have been removed or
manipulated or repaired otherthan themanufacturer.

DISPOSAL AND RECYCLING

The machine, accessories and packaging should be
sorted for environmental-friendly recycling..
Only for EC countries:
Do not dispose of power tools into
household waste! According the European
Guideline 2002/96/EC for Waste
Electrical and Electronic Equipment and its
implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
Subject to change without notice.
Battery packs/batteries:
Li-Ion:
Please observe the instructions in
section "Transport". Do not dispose of
battery packs/batteries into household
waste, fire or water. Battery packs/
batteries should be collected, recycled
or disposed of in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 91/157/EEC.
5_REGULATIONS

TECHNICAL DATA

= Battery
= Voltage
= Battery Power
= charging time
= no load speed
rpm
= Torque
= Inserting chuck
Ins
= Wood cut
max
= Steel cut
max
= Weigth
L
= Sound power level
WA
L
= Sound pressure level
PA
= Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For
lower voltage and models for specific countries, these
values can vary. Please observe the article number on
the type plate of your machine. The trade names of the
individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN
60745. Typically the A-weighted noise levels of the
product are: Sound pressure level 87 dB(A); Sound
power level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. lt may be
used for a preliminaryassessment of exposure. The
declared vibration emission level represents the main
applications of the tool. However if the tool is used
for different applications,with different accessories or
poorly maintained, the vibration emission may differ.
This may significantly increase the exposure
leveloverthe totalworking period.
An estimation of the levelof exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
/
/
14

Publicidad

Tabla de contenido
loading

Tabla de contenido