ProMinent DULCO Trans 50/1200 PVDF Instrucciones De Servicio página 12

Safety Instructions motor, pump
Safety instructions Motor, Pump
 In case of emergency remove the plug
 The motor is not explosion-proof.
 Never leave the pump unattended.
 Do not operate the pump in hazardous locations.
 Do not use the pump for transferring flammable liquids.
 Only use the pump for its intended purpose.
 The pump should be used in vertical position only.
 Install the pump in a way which ensures that it cannot
fall into the container.
 Regularly check the pump and hose to ensure safe operation.
 Regularly check the motor according to the relevant national
safety instructions and/or rules for prevention of accidents
(in F.R. of Germany these are e.g. BGV A3).
 Make sure that the motor will not start unintentionally.
 The pump can start immediately after inserting the plug.
 Before inserting the plug to the socket, ensure that the
2-step-switch is set to „0" (central position).
 The motor starts automatically after a power failure.
 The pump should not be immersed deeper into the liquid
than the outlet connection.
 The pump should only be left standing in the liquid
as long as in operation.
 Only use the pump up to max. 60°C liquid temperature.
 Surrounding temperature: 0°C up to max. +40°C
 Comply with all relevant safety instructions.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
 Keep the air escaping and the displacement in mind when
immersing the pump in the liquid. Lower the pump carefully.
 Install appropriate splash guards for open barrels or containers.
 Remove spilled liquid from the floor and dispose of it in an
environmentally sound manner.
 Never operate the pump dry.
 Do not expose the pump to the weather.
.
.
12