Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3: Configure fax settings
Change the printer's fax settings to meet
your needs after you have connected the
printer to a phone line.
Note: To use the same fax resolution
and lighter/darker settings for all faxes
sent from the printer, configure the
settings as you wish, and then touch
Set as New Defaults.
If you want to configure this setting...
Auto Answer
Set the answer mode to On if you want the
printer to automatically answer incoming
calls and receive faxes. The printer will
answer these incoming calls after the
number of rings that has been specified in
the Rings to Answer setting.
Rings to Answer (Optional)
Set the number of rings to answer
Note: The number of rings to answer
for the printer should be greater than
the number of rings to answer for the
answering machine.
10
Set up and use fax
Where can I change fax
settings?
You can configure fax settings using
the following tools:
Printer's control panel
Touch the Setup button on the printer's
control panel, touch Fax Settings, and
then touch the setting you want to
configure.
HP software
If you have installed the HP software
on your computer, you can configure
fax settings using the software that was
installed on your computer.
For more information about using these
tools or settings, see the user guide.
...do this:
1.
Touch right arrow
Setup.
2.
Touch Fax Setup, and then touch Basic
Fax Setup.
3.
Touch Auto Answer, and then touch
ON.
1.
Touch right arrow
Setup.
2.
Touch Fax Setup, and then touch Basic
Fax Setup.
3.
Touch Rings to Answer.
4.
Touch up arrow
number of rings.
5.
Touch Done, to accept the setting.
and then touch
and then touch
or
to change the
Publicidad
Capítulos
Tabla de contenido
