HP PHOTOSMART 7510 e-ALL-IN-ONE Serie Manual Del Usaurio

PHOTOSMART
Verify the box content
Setup the printer
1
Unpack the printer
Remove all tape, protective film, and packing material.
2
Turn on the printer
Connect the power cord in the back. Press the power button to turn on the printer.
Continue setup and activate ePrint on the printer display
Animations and instructions on the touch screen display will guide you through all the steps you need to
finish setting up your printer.
Control panel buttons are lit only when available. Flick to scroll through the menu
Home
Home
(Touch to display the
(Touch to display the
Home screen)
Home screen)
Back
Back
(Touch to return to the
(Touch to return to the
previous screen)
previous screen)
No CD/DVD drive?
For computers without a CD/DVD drive, please go to
www.hp.com/support to download and install the software.
Standard data rates may apply
x5
options. Touch the icons and menu options to make a selection.
Select Language
English
Español
Deutsch
Français
7510 e-ALL-IN-ONE SERIES
<3M
* Not included with all models.
Help
Help
(Touch to run animations
(Touch to run animations and
get more help)
and get more help)
Cancel
Cancel
(Touch to stop the current
(Touch to stop the current job in
job in progress)
progress)
Register your printer
Get quicker service and support alerts by
registering at www.register.hp.com.
© 201 1 Hewlett-Packard Development Company, L.P.
*CQ877-90068*
*CQ877-90068*
Printed in [English]
CQ877-90068