POWER SUPPLY:
IMPORTANT – (Please read carefully)
WARNING:
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
Remove house fuse or open circuit breaker before beginning installation. Do not use an
extension cord or adapter plug with this appliance. Follow National electrical codes or
prevailing local codes and ordinances.
Electrical supply:
These vent hoods must be supplied with 120V, 60Hz, and connected to an individual,
properly grounded branch circuit, and protected by a 15 or 20 amp circuit breaker or
time delay fuse.
electrician before proceeding.
back wall. Refer to Wiring Locations on page 15.
WARNING:
result in a risk of electric shock. Check with a qualified electrician or service representative
if you are in doubt whether the appliance is properly grounded.
The improper connection of the equipment-grounding conductor can
- 14 -