Parts; Mounting And Adjustments - Truper Expert SDS MAX MADE-10NX Manual De Instrucciones

SDS max
Shank Chuck collar
protection
Spare
Carbon
Brushes
Auxiliary Handle
Operate the power tool only with the
CAUTION
auxiliary handle installed (A).
• The auxiliary handle can be rotated to any position for a
secure, low-fatigue posture.
• Rotate the auxiliary handle grip (B) counterclockwise to
loosen the mount (C) and swing the auxiliary handle to
the desired position.
• Then, retighten the auxiliary handle grip by turning
clockwise.
• Make sure the mount band is positioned in the proper
section of the housing.
6
ENGLISH
Type D
auxiliary
handle
Ring for adjusting
the required angle
Grease
Tube

Mounting and Adjustments

Parts

Speed adjustment
knob
C
Vibration
absorber
Power
trigger
Maintenance Power Cord
indicator Protection
Power
Cord
A
B
Anti-skid
handle
Trigger off/switch
for
continuous use