Setting The Correct Humidity Output - Easy Home HF3102A-UL Manual Del Usuario

Operation
13. In a few moments, the mist will start coming through the mist channel (p. 4, fig.
B 11 ) . Use the control knob (p. 3, fig. A
output. Turning the knob clockwise will increase the moisture output, turning the
knob counterclockwise will reduce the moisture output.
14. Note: When at maximum level, it is normal to hear a faint dripping sound.
15. When the humidifier runs out of water, the indicator light (p. 3, fig. A
red, and the mist output will stop. This is a safety feature to prevent the humidifier
from possibly overheating and damaging the mist chamber (p. 4, fig. D
16. Turn the control knob to reset and refill the water tank. In a few moments, the
green indicator light will turn on. Turn power on by turning the control knob
clockwise ( to the right).

Setting the correct humidity output

Adjust the mist control so that the mist rises up and gets absorbed by the room
air. Do not turn on too high an output as the mist cannot be absorbed by the air
and accumulates on the surface around the humidifier. If the humidifier is placed
near a fan or air conditioning outlet, the mist may be forced down by the foreign
air stream. Change the location of the humidifier or reduce the output of the other
room conditioning appliances.
16
6 ) to adjust the intensity of the mist
) will turn
7
1 ).