Using Essential Oils; Helpful Hints - Easy Home HF3102A-UL Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using essential oils

Essential oils can be used on the aroma pad located in the aroma tray on the top of
the mist channel (p. 4, fig. B
like.
1. Place about 3 drops of desired scent on the aroma pad located in the aroma tray
(p. 4, fig. C
12
2. Push the aroma pad into the medicine cup, (p. 4, fig. B
3. Each pad should only be used per desired scent.
4. Before attempting to reuse aroma pad with a different scent, clean the aroma
pad by lightly hand washing it in warm water and letting it thoroughly air dry.

Helpful hints

1. It is best to keep the humidity level at about 30-50 percent of relative humidity.
2. The comfort level of humidity will vary from room to room and with changing
room conditions.
3. In cold weather, windows and even some walls may fog or develop frost from
excessive indoor humidity. If this occurs, reduce the mist intensity setting to avoid
damage from condensed water dripping on windowsills.
4. Too much humidity in the room may allow moisture to accumulate on surfaces
where bacteria and fungi can grow. Moisture that gathers may also damage
furniture and walls, especially wallpaper.
5. To eliminate excessive humidity, especially in small rooms, leave the room door
open and adjust the mist intensity control setting.
6. Note: To avoid possible white dust due to hard water, it is recommended to use
filtered or distilled water.
7. DO NOT use hot water. Use cool tap water.
8. DO NOT add any medication or other additives to the water.
9. DO NOT pour water into Vapor Outlet Channel (p. 4, fig. B
10. Note: Do not attempt to move humidifier while water tank is placed on the water
basin. Doing so may cause leakage of water. Also, do not place humidifier on the
floor. Place humidifier on an elevated surface.
11
). You can mix and match any oil scents you would
).
8
) .
11
).
Operation
17

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido