Bosch GWX 18V-8 Professional Manual Original página 20

20 | English
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) LED work light
Technical data
Angle grinder
Article number
Rated voltage
A)
Rated speed
Max. grinding disc diameter
Restart protection
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary handle
– with standard auxiliary handle
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Recommended rechargeable batteries
Recommended chargers
A) Rated speed in accordance with EN 60745-2-3
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to EN 60745-2-3.
1 609 92A 5WH | (02.12.2020)
(5) On/off switch
(6) Rechargeable battery
(7) Battery release button
(8) Auxiliary handle (insulated gripping surface)
(9) Protective guard for grinding
(10) X-LOCK grinding disc/flap disc
(11) Protective guard for cutting
(12) X-LOCK cutting disc
(13) Handle (insulated gripping surface)
(14) X-LOCK holder
(15) Hand guard
(16) X-LOCK backing pad for fibre discs
(17) X-LOCK fibre disc
(18) X-LOCK clip for fibre discs
(19) X-LOCK cup brush/disc brush
(20) X-LOCK diamond core cutter
(21) Extraction guard for cutting with cutting guides
(22) X-LOCK diamond cutting disc
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
-1
min
mm
B)
kg
kg
°C
C)
and °C
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWX 18V-8 GWX 18V-8
3 601 JJ7 1.. 3 601 JJ7 0..
18
11,000
115
●
2.1–3.1
2.0–3.0
0 to +35
–20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... GAL 18...
GAX 18... GAX 18...
GAL 36...
GWX 18V-8 GWX 18V-8
3 601 JJ7 1.. 3 601 JJ7 0..
Bosch Power Tools
a)
18
11,000
125
●
2.2–3.2
2.0–3.0
0 to +35
GAL 36...