Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CTJ195B Manual De Instrucciones

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

The check for the absence of damage and the completeness of the device must be made upon receipt of the
package. In the event of identification of damage due to transport, refuse or accept the delivered product only
with reservations *. A complaint detailing the defects observed must then be made. The perception of damage
is only possible in the event of a complaint formulated within the prescribed time limits, ie 24-48 hours
maximum.
* written on the carrier's delivery papers or digital.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Power
Thickness
slices
Cutting height
Weight
Food
Blade diameter
Dimensions
CTJ195B /
CTJ220B
CTJ195 BR
150 Watt 240 Watt
0.2-12 mm 0.2-12 mm
150mm 160mm
11.7Kg 14.8Kg
50 Hz - 230 V 50 Hz - 230 V
195mm 220mm
L425 x P370 L460 x P450
x H340 mm x H375 mm
CTJ250 /
CTJ250BR
240 Watt
0.2-12 mm
180mm
15.2Kg
50 Hz - 230 V 50 Hz - 230 V
250mm
L460 x P450 L520 x P500
x H380 mm x H465 mm
CTJ300B
380 Watt
0.2-15 mm
200mm
21.3Kg
300mm
EN